Clik here to view.
Re: hyper-v polling's side effects
Hi Balki 1429. Here is my node. Hyper-V polling not yet enabled. "Edit Node" is there. I do "List Resources", select "Hyper-V", and end up on "Virtualization Summary -> Hyper-V Host Details" now...
View ArticleRe: is there a better way to do this?
Yea, cannot put a delay on the reset action. You can probably set the reset action to execute only between 7am-7pm.
View ArticleClik here to view.
Re: hyper-v polling's side effects
Actually "Edit Node" and "List Resources" are there on the page in the "management" section, they just got pushed down outside of the viewable part of the UI (my monitor is 1680x1050 and the browser...
View ArticleHow do I delete old VMWare ESX servers from Storage Manager?
I've recently upgraded to Storage Manager 5.7 and really like the new Storage Manager Health Status screen. What it has picked up, is that I have lots (100+) of old "ghost" devices which are old...
View ArticleClik here to view.
Re: NCM Config - Router Username, Password and Enable password
Hi, in the WEB-Interface go to "Settings" then you get this page: After that click on NCM-Setting and go on Global Device Default to Connection Profiles: Hope you'll find it. Kind regards,Flo
View ArticleRe: Deleting a node does not delete assigned pollers
Hello Example:Netobject V:33SUBSTRING(NetObject, 3, 10) = 33In that where clausule: 33 IN (SELECT VolumeId FROM DeletedVolumes) try match 33 in all VolumeId.It is ok. Probably in some way Volumeid was...
View ArticleRe: NCM Config - Router Username, Password and Enable password
Connection profiles was introduced in NCM v7.2SolarWinds NCM 7.2 Release Candidate is now available!
View ArticleRe: Extreme Switch Polling and High CPU
Thought I'd ask what, if any, feedback you got from Solarwinds around this issue (you mention you were going to open a support ticket?) Out of interest, were you seeing the high CPU usage through the...
View ArticleRe: SCP taken and passed
You're absolutely right. The cert is posted, the logo is emailed and the portal has been discontinued. But the posted documents still referred to it SW need to review the pack contents.
View ArticleClik here to view.
Re: Which interfaces do I really need to monitor?
For the cisco devices, I only monitor uplinks and any ports that have an "important" device on the other end. The device is added to the NPM database by its Loopback IP address. Anything you monitor,...
View ArticleRe: question for the Upload the config.
It is uploaded to the running config. Tick the box "Write to NVRAM" if you want to save it to the startup config as well.
View ArticleClik here to view.
Re: Importing list of devices
You need to use the Network Discovery to add in a large number of Nodes. You can see the following on the Add Node page.
View ArticleRe: Installing *new* Applications once FOE is alreaady installed.
Let me start by saying I HATE THE WAY FOE DOES THIS!!!! I was on the phone with them for 2 hours just to have them tell me to gather logs.... I was trying to install NCM on a server with FoE on it, i...
View ArticleRe: Which interfaces do I really need to monitor?
isto , for specifics you might want to include a little insight about your setup. Just as well, for me Sonar is a great tool to get your nodes into the system, but you might find yourself managing and...
View ArticleRe: Need to understand nDepth,correlation,events,filter and alerts
Hi Kurtsi, thanks for the nice explanation about product. actually i am stuck with creating rules however able to create filters but when i am trying to create a rule from template say for "bad login...
View ArticleAssetInventory_NetworkInterface missing fields?
Hi all, Could someone please check their AssetInventory_NetworkInterface table for the Model field? I'm getting the following error in the AssetInventory.VMwareExtension log and want to know if its a...
View ArticleNCM compliance check differs between manuall check and downloaded config
Hi, I actually have some Trouble with my compliance checks for some lines for my line Interfaces.Is there any difference between the manual check in form that I paste a config block in the testwindow...
View ArticleRe: Interface utilization reports
Hi Kandatihari,I don't know the answer for your question .I wanted to ask you if in your SQL request you are doing the average between transmit and receive or only one ? RgdsVincent
View ArticleClik here to view.
Custom package not deploying - Result code: 0x80240003
I have built a customer package to configure Intel AMT. I have set the applicability rule and pre-requisite to a registry key that I know exist on the computers, but each time I try to deploy the...
View Article